PLM power module
Noise-optimisation through integration
- Bell housing, coupling, internal gear pump, hydraulic oil filter with electrical contamination gauge and proportional pressure control are grouped together in a thoroughly compact, completely installed and tested unit.
- Interface problems to the engine are void ...
the PLM can be directly flanged onto standard motors - Reduced assembly expenditure and saving of auxiliary components...
- Assembly of the PLM with only four screws
- One coupling half is already pre-mounted on the PLM
- No assembly and pipework on pump, filter or pump block - Significant reduction of the noise level ...
by using a solid, asymmetrical form cast housing without resonance area and the new, integrated and noise-optimized high pressure interior gear pump from 8 to 50 cmó/U - Modern SRT filter-technology ...
- low differential pressure in pure condition and small dimension with long service life
- an optimum of performance during alternative loading with pressure and/or flow rate variations over the entire sevice life of the filter and as a result purer liquids - Variability ...
- Interfaces at the PLM allow the easy installation further auxiliary functions
- depending on requirements the use of double internal gear pumps is possible - Compact design ...
extremely compact installation dimensions by elimination of the conventional bell housing. - PLM data sheet
- Assembly instructions
